Table in plexiglass with top created from a large sheet of cast  GS Plexiglas® (2000x3000mm, and 70mm thick) using a 5-axis  numerical control machine. The process takes over 30 hours  and involves two rough-hewing and three finishing operations,  followed by a further two smoothing procedures and then three  polishing procedures (using abrasive paste, polishing wax and  finishing polish), all performed by hand, and requiring another  20 hours’ work. The holes for the insertion of the legs into  the table top are made in the CNC machine by interpolation.  The legs are made using 3 cast GS Plexiglas® cylinders,  machine-processed to shape the part that slots into the table  top, after which they are smoothed and polished by hand.  The three resulting legs are all different, due to the different  angles at which they are inserted and positioned. They are  all perfectly and seamlessly integrated into the overall volume  of the table. Drop Table is available in limited edition.